Ministry of Transportation / Ministère des Transports
Home
HOME > Publications > OPS > OPS/CDED Revision Info Sheets

OPS/CDED Revision Info Sheets

OPS Volume 3: Revision # 48


REVISION INFORMATION SHEET

ONTARIO PROVINCIAL STANDARDS
FOR ROADS AND MUNICIPAL SERVICES

VOLUME 3
DRAWINGS FOR ROADS, BARRIERS, DRAINAGE,
SANITARY SEWERS, WATERMAINS AND STRUCTURES


MANUAL REVISION #48
November 2003
Each Owner is responsible for determining implementation dates and directions for use of Ontario Provincial Standards, therefore, manual holders are cautioned about immediately discarding superseded and cancelled drawings.

WAITING TO HEAR FROM YOU

Ontario Provincial Standards are a reflection of solutions to the needs of OPS users. We welcome your comments and suggestions to assist us in revising existing standards and in developing new standards. Your input to the standards helps OPS stay current and useful. If you have a standard that works in your municipality or area, or a suggestion to revise a standard, send it to the Head, OPS Administration, for possible inclusion into the Ontario Provincial Standards.

This manual is revised as follows:

Index Pages Volume 3

Remove
Insert
Page
Dated
Page
Dated
2.1 - 2.4
November 2001
2.1 - 2.4
November 2003
4.1 & 4.2
November 2002
4.1 & 4.2
November 2003
5.1 - 5.3
November 2001
5.1 - 5.3
November 2003
7.1 - 7.3
November 2001
7.1 - 7.3
November 2003
8.1 - 8.3
November 2002
8.1 - 8.3
November 2003
9.1 - 9.8
November 2002
9.1 - 9.8
November 2003
11.1
November 2001
11.1
November 2003
40.1
November 2001
40.1
November 2003


Standard Drawings Volume 3


Superseded/Cancelled
(Remove)
Revised/New
(Insert)
Remarks
OPSD
Revision
OPSD
Revision
208.010
--
208.010
1
"BENCHING OF EARTH SLOPES"
See Summary of Revisions
210.070
--
210.070
1
"GRANULAR SEALING"
See Summary of Revisions
212.01
1
212.010
0
"RESURFACING WITH CROSSFALL CORRECTION, TANGENT SECTION"
See Summary of Revisions
212.02
1
212.020
0
"RESURFACING WITH CROSSFALL CORRECTION, SUPERELEVATED SECTION"
See Summary of Revisions
212.03
1
212.030
0
"RESURFACING, EXISTING CROSSFALL MAINTAINED"
See Summary of Revisions
--
--
400.040
0
New Drawing
"CAST IRON, ONE-PIECE FRAME WITH FLAT SQUARE GRATE, HERRING BONE OPENINGS, FOR TEMPORARY INSTALLATION"
--
--
400.081
0
New Drawing
"CAST IRON, CURB INLET FRAME WITH TWO PIECE RAISED COVER FOR CATCH BASIN"
405.010
--
405.010
1
"MAINTENANCE HOLE STEPS, HOLLOW"
See Summary of Revisions
405.020
--
405.020
1
"MAINTENANCE HOLE STEPS, SOLID"
See Summary of Revisions
508.020
--
508.020
1
"SEALING OR RESEALING OF JOINTS AND CRACKS IN CONCRETE PAVEMENT AND CONCRETE BASE"
See Summary of Revisions
560.020
--
560.020
1
"EXPOSED CONCRETE PAVEMENT, FULL DEPTH CONCRETE SLAB REPAIR JOINT DETAILS"
See Summary of Revisions
708.01
2
708.010
0
"CATCH BASIN CONNECTION FOR RIGID MAIN PIPE SEWER"
See Summary of Revisions
708.020
--
708.020
1
"SUPPORT FOR PIPE AT CATCH BASIN OR MAINTENANCE HOLE"
See Summary of Revisions

Superseded/Cancelled
(Remove)
Revised/New
(Insert)
Remarks
OPSD
Revision
OPSD
Revision
708.03
--
708.030
0
"CATCH BASIN CONNECTION FOR FLEXIBLE MAIN PIPE SEWER"
See Summary of Revisions
710.010
-
710.010
1
"CAPPING EXISTING STRUCTURES MAXIMUM 4.0 m COVER"
See Summary of Revisions
801.01
-
801.010
0
"CUT END FINISH, CIRCULAR PIPE AND PIPE-ARCH CORRUGATED STEEL PIPE"
See Summary of Revisions
801.02
--
801.02
1
"END SECTION DETAILS, CORRUGATED STEEL PIPE"
See Summary of Revisions
801.03
-
801.030
0
"BEVEL DETAILS, CIRCULAR AND PIPE-ARCH STRUCTURAL PLATE CORRUGATED STEEL PIPE"
See Summary of Revisions
911.381
0
911.381
1
"GUIDE RAIL SYSTEM, CONCRETE BARRIER, PERMANENT TRANSITION INSTALLATION, CONCRETE BARRIER TO STRUCTURE"
See Summary of Revisions
--
--
911.382
0
New Drawing
"GUIDE RAIL SYSTEM, CONCRETE BARRIER, DOWEL CONNECTION DETAIL"
912.104
0
912.104
1
"GUIDE RAIL SYSTEM, STEEL BEAM, STEEL POST WITH WOODEN OFFSET BLOCK, COMPONENT"
See Summary of Revisions
912.130
0
912.130
1
"GUIDE RAIL SYSTEM, STEEL BEAM, STEEL POST WITH WOODEN OFFSET BLOCK ASSEMBLY, INSTALLATION - SINGLE RAIL"
See Summary of Revisions
980.101
0
980.101
1
"PEDESTRIAN BARRICADE, INSTALLATION"
See Summary of Revisions
1101.010
--
1101.010
1
"PRECAST VALVE CHAMBER, 1200 mm AND 1500 mm DIAMETER"
See Summary of Revisions

Superseded/Cancelled
(Remove)
Revised/New
(Insert)
Remarks
OPSD
Revision
OPSD
Revision
1101.030
--
1101.011
0
"PIPING LAYOUT FOR BUTTERFLY AND GATE VALVES 350 mm DIA. AND SMALLER IN CIRCULAR PRECAST CHAMBERS"
See Summary of Revisions
1104.010
-
1104.010
1
"WATER SERVICE CONNECTION DETAIL, 20 AND 25 mm DIAMETER SIZES"
Note 1 rewritten.
4642.000
--
--
--
Cancelled
"ANCHORAGE FOR OVERHEAD SIGN SUPPORT ON RETAINING WALL"
Design of the anchorages and pedestals is determined by the sign manufacturer to suit the various sign types and site conditions.
4670.000
--
4670.000
1
"CONSTRUCTION AND EXPANSION JOINT IN CONCRETE"
See Summary of Revisions
4810.000
--
--
--
Cancelled
"STEEL PEDESTAL DETAIL
150 mm HIGH ALUMINUM, TRUSS SIGN SUPPORT"
Design of the anchorages and pedestals is determined by the sign manufacturer to suit the various sign types and site conditions.
4810.500
--
--
--
Cancelled
"STEEL PEDESTAL DETAIL 300-1200 mm HIGH, ALUMINUM TRUSS SIGN SUPPORT"
Design of the anchorages and pedestals is determined by the sign manufacturer to suit the various sign types and site conditions.
4820.000
--
--
--
Cancelled
"8 BOLT ANCHORAGE INSERT FOR STEEL SECTIONAL SIGN SUPPORT"
Design of the anchorages and pedestals is determined by the sign manufacturer to suit the various sign types and site conditions.


SUMMARY OF REVISIONS TO OPSD 208.010
November 2003

BENCHING OF EARTH SLOPES
  • In the label "existing outside edge of shoulder rounding", "shoulder" has been deleted. Also, "shoulder" has been deleted in Note 1.
  • In the label "existing slope to be stripped when specified before benching", "when specified" has been deleted.
  • In the label "height of fill for benching", "for benching" has been deleted.
  • In Note A, "or where specified" has been deleted from the sentence, and the slope has been rewritten 3H:1V.
  • Note C has been deleted.


SUMMARY OF REVISIONS TO OPSD 210.070
November 2003

GRANULAR SEALING
  • In the paved shoulder with guide rail view, "narrowed" has been deleted in the label for "edge of narrowed paved shoulder." The "300 mm" dimension for paved shoulder at guide rail installations has been amended to "varies." The "Notes 1 and 4" label for the width of the granular sealer has been amended to "Note 1."
  • In the paved shoulder without guide rail view, the rounding width has been modified to reflect 0.5 m.
  • Existing Note 3 has been deleted.
  • Existing Note 4 has been reordered to Note 3 and rewritten.
  • In existing Note A, "or metres" has been deleted.


SUMMARY OF REVISIONS TO OPSD 212.010
November 2003

RESURFACING WITH CROSSFALL CORRECTION, TANGENT SECTION
  • Existing Notes 1 and 3 have been revised.
  • Existing Note 2 and Note A have been deleted.
  • Labels in Case 2 have been deleted for consistency with other drawings in series.
  • A legend has been added for the pavement surfaces.
  • The drawing has been renumbered.


SUMMARY OF REVISIONS TO OPSD 212.020
November 2003

RESURFACING WITH CROSSFALL CORRECTION, SUPERELEVATED SECTION
  • Existing Notes 1 and 3 have been revised.
  • Existing Notes 2, A, and B have been deleted. Other notes reordered.
  • A legend has been added for the pavement surfaces.
  • The drawing has been renumbered.


SUMMARY OF REVISIONS TO OPSD 212.030
November 2003

RESURFACING, EXISTING CROSSFALL MAINTAINED
  • Existing Notes 1 and 3 have been revised.
  • Existing Notes 2 and A have been deleted. Other notes reordered.
  • A legend has been added for the pavement surfaces.
  • The drawing has been renumbered.


SUMMARY OF REVISIONS TO OPSD 405.010
November 2003

MAINTENANCE HOLE STEPS, HOLLOW
  • Note 1 added.
  • Drawing views reformatted.


SUMMARY OF REVISIONS TO OPSD 405.020
November 2003

MAINTENANCE HOLE STEPS, SOLID
  • Section A-A added to Circular Aluminum step options.
  • Section C-C added to Rectangular Aluminum step options.

SUMMARY OF REVISIONS TO OPSD 508.020
November 2003

SEALING OR RESEALING OF JOINTS AND CRACKS IN CONCRETE PAVEMENT AND CONCRETE BASE
  • The title of the drawing has been revised to include concrete base.
  • The existing "top of pavement" labels have been revised to "top of concrete".
  • A "25 mm max" width dimension has been added to all views.
  • In the view for compression seal, the reference for the depth dimension has been deleted.
  • Appropriate Note 1, 2, or 3 labels have been added to all views.
  • In existing Note A, the ratio for hot poured rubberized sealant has been revised to 1H:1V. The hot poured rubberized sealant view has been revised to reflect his change.
  • Existing Note C has been rewritten.
  • Note 3 has been added. Other notes have been renumbered and reordered.


SUMMARY OF REVISIONS TO OPSD 560.020
November 2003

EXPOSED CONCRETE PAVEMENT, FULL DEPTH CONCRETE SLAB REPAIR JOINT DETAILS
  • In Section C-C, Longitudinal Joint view, the tie bars and associated labelling have been deleted.
  • In Section D-D, the labelling for concrete pavement thickness has been deleted.
  • Note D has been revised.


SUMMARY OF REVISIONS TO OPSD 708.010
November 2003

CATCH BASIN CONNECTION FOR RIGID MAIN PIPE SEWER
  • Titles revised.
  • Note 2 added.
  • Existing Notes A deleted; new Note A added.
  • Details redrawn; labelling revised in some cases.

SUMMARY OF REVISIONS TO OPSD 708.020
November 2003

SUPPORT FOR PIPE AT CATCH BASIN OR MAINTENANCE HOLE
  • Note 1 revised.
  • Label for length of concrete cradle revised.
  • Drawing layout revised.


SUMMARY OF REVISIONS TO OPSD 708.030
November 2003

CATCH BASIN CONNECTION FOR FLEXIBLE MAIN PIPE SEWER
  • Title revised.
  • Detail redrawn to show tee.
  • Option for the use of bend fittings added.
  • Cover added to bedding label.


SUMMARY OF REVISIONS TO OPSD 710.010
November 2003

CAPPING EXISTING STRUCTURES MAXIMUM 4.0 m COVER
  • In the circular concrete slab detail, "see table" has been moved below the D dimension.
  • In Note B, "bottom" has been deleted and the clear cover for reinforcing steel has been increased to 60 mm ± 20 mm.
  • In Note C, "or metres" has been deleted.
  • In the rectangular slab detail, "see table" has been removed and labelled "L" and "W".
  • In the table, the existing structure dimensions for rectangular concrete slabs have been amended.
  • In the table, under the headings, the noted "mm" dimensioning has been deleted.
  • In the table, the rebar spacing has been revised for all cap sizes. The bottom reinforcing steel has been reviewed with the Canadian Highway Bridge Design Code and adjusted accordingly.
  • In the title of the drawing, "General" has been replaced with "Existing" to read Capping Existing Structures.
SUMMARY OF REVISIONS TO OPSD 801.010
November 2003

CUT END FINISH, CIRCULAR PIPE AND PIPE-ARCH CORRUGATED STEEL PIPE
  • Title revised.
  • Existing Note 1 deleted. New Note 1 added.
  • Note A deleted. Existing Note B rewritten and renamed Note A.
  • Existing Notes C and D deleted; new Notes C and D added.
  • Pipe-Arch Bevel and finish renamed Partial Bevel.
  • Pipe diameter recommendations for square end finish deleted.
  • Partial bevel, step-bevel, and skew end finish restricted to structural plate corrugated steel pipe.
  • Abbreviations deleted.


SUMMARY OF REVISIONS TO OPSD 801.02
November 2003

END SECTION DETAILS, CORRUGATED STEEL PIPE
  • Note B rewritten.
  • Pipe-arch table and circular pipe table revised.
  • Note 1 rewritten.


SUMMARY OF REVISIONS TO OPSD 801.030
November 2003

BEVEL DETAILS, CIRCULAR AND PIPE-ARCH STRUCTURAL PLATE CORRUGATED STEEL PIPE
  • Titles revised.
  • Abbreviations deleted.
  • New Note B added. Other note reordered.


SUMMARY OF REVISIONS TO OPSD 911.381
November 2003

GUIDE RAIL SYSTEM, CONCRETE BARRIER, PERMANENT TRANSITION INSTALLATION, CONCRETE BARRIER TO STRUCTURE
  • Transition section redesigned.
  • In the Plan and Section A-A views, distance to breakpoint from the back of barrier wall revised to 1000 mm min.
  • In the Plan view, breakpoint radius revised to 1000 mm min.
  • In the Plan and Elevation views, dowel connection added at the construction joint.
  • In the Plan view, dimensioning revised.
  • In the Elevation view, reference to OPSD 911.130, Type A, and 911.131, Type C, added.
  • In the Elevation view, “End wingwall panel” label deleted.
  • In the Elevation view, “Bottom of transition section” label added.
  • In the Elevation view, expansion joint requirements and dowel location dimensions relocated to OPSD 911.382.
  • Section A-A redrawn to reflect new design.
  • In the Section A-A view, 10% max. slope on shoulder behind the barrier wall added.
  • In the Section A-A view, 3:1 slope label deleted.
  • Existing Section B-B deleted.
  • Existing Dowel Detail relocated to OPSD 911.382.
  • Title revised.


SUMMARY OF REVISIONS TO OPSD 912.104
November 2003

GUIDE RAIL SYSTEM, STEEL BEAM, STEEL POST WITH WOODEN OFFSET BLOCK, COMPONENT
  • In the Routed Wooden Offset Block view, length of block revised to 360 mm and distance from the top of the block to the centre of hole revised to 180 mm.


SUMMARY OF REVISIONS TO OPSD 912.130
November 2003

GUIDE RAIL SYSTEM, STEEL BEAM, STEEL POST WITH WOODEN OFFSET BLOCK, INSTALLATION - SINGLE RAIL
  • In the Side Views, length of block revised to 360 mm.
  • In the Abbreviations, HB-Hex bolt is deleted.


SUMMARY OF REVISIONS TO OPSD 980.101
November 2003

PEDESTRIAN BARRICADE, INSTALLATION
  • In the Elevation view, reference to retaining wall deleted, dimensioning revised, and “6 mm dia. hole” label revised.
  • In the Plan of Base Plate view, option of equal chemical anchors added.
  • In the Section B-B view, 600.mm maximum difference in elevation added.
  • In the Joint Detail view, diameter of round steel bar added, end view deleted, distance from centre of post to joint revised, and symbol added for welding round steel bar to rail added.
  • Existing Note 2 deleted.
  • Existing Note 3 deleted.
  • New Note G added. Other note reordered.
  • Title revised.


SUMMARY OF REVISIONS TO OPSD 1101.010
November 2003

PRECAST VALVE CHAMBER, 1200 mm and 1500 mm DIAMETER
  • Drawing title revised.
  • Note 1 and new Note A added; existing Note B and C deleted; other notes reordered.
  • Cross Section view dimensions and labels changed in some cases.
  • Reference to OPSD 704.010 added to Cross Section view to include adjustment unit and frame installation requirements.
  • Sump removed from Cross Section view for precast base as there is no sump in precast base.
  • Plan view for Cast-In-Place Base added.
  • Table revised.


SUMMARY OF REVISIONS TO OPSD 1101.011
November 2003

PIPING LAYOUT FOR BUTTERFLY AND GATE VALVES 350 mm DIA. AND SMALLER IN CIRCULAR PRECAST CHAMBERS
  • Drawing renumbered from OPSD 1101.030.
  • Spacer with victaulic coupling added to all views.
  • Requirement for flexible material sealant added around each pipe passing through the chamber walls.
  • Note A modified by including "appurtenances".
  • New Note D added. Other note reordered.

SUMMARY OF REVISIONS TO OPSD 4670.000
November 2003

CONSTRUCTION AND EXPANSION JOINT IN CONCRETE
  • Title revised.
  • Chamfer dimensions revised.
  • Original note 1 deleted. Existing notes revised.
  • On the expansion joint views, the external waterstop and joint filler material have been revised.